[Fixed] Too Many Passcode Attempts, Reset Apple Watch and Pair Again


By Jack

Update on

Too Many Passcode Attempts Apple Watch

What can I do upon noticing the message “Too Many Passcode Attempts, Reset Apple Watch and pair again“? I know I should “reset” my Apple Watch, but I don’t know how to do it. Please assist me.

Too Many Passcode Attempts, Reset Apple Watch and pair again

If the above question applies to you, you might seek an immediate solution, correct? So, let’s go ahead and learn the solutions to address this situation and reset your Apple Watch.

Apple Watch Has Too Many Passcode Attempts – What Are the Reasons?

Some users see a notice on Apple Watches saying they’ve tried to access it too many times. Furthermore, this message requires them to reset and pair the device again.

If you’re an Apple user, you might wonder what steps to reset an Apple Watch.

Also, you might further worry whether doing so would result in any information or data loss. Don’t worry; we will describe how to resolve this error in the remainder of this article.

Before reading the solutions, let’s learn about the possible causes for Apple Watch to experience such an error.

The message’s meaning is that you have entered an inaccurate passcode several consecutive times. So, in simplest terms, you have mistakenly entered the password so many times.

A string of unsuccessful attempts preceded your arrival at this reset screen. Attempting to input an incorrect passcode more than five times will lock your watch. The error message “Wrong Passcode.”

In one minute, you are supposed to retry. You cannot reset the respective Apple Watch until this option appears.  

Wrong Passcode

The Waiting Time is Prolonged Whenever You Enter the Password Again

After the initial 1 minute, your Apple Watch will prompt the user to enter it again. If you input the incorrect passcode after five minutes, you’ll have to wait another 15 minutes. Again, you’ll have to wait fifteen minutes before making another effort if this doesn’t work either.

The watch will tell you to try once again in sixty minutes if you input the incorrect passcode twice. Assume that you input the wrong password for the third time. If so, the next message will say that you have put in too many attempts.  

Besides, are you looking for a way to bypass Apple Watch activation lock? Here are some of the top effective methods to carry out this task.

Technically, You Have Forgotten Your Password

Well, this specific situation implies that you have a bit of really bad luck. So, after that much of attempts, you are in a helpless situation. You have reached this stage as you don’t remember the passcode anymore.

So, there is no point in entering the password again and again. The next resort is to reset the respective Apple Watch. Until then, you will not be able to use your Apple Watch.

Also, if you are experiencing the Apple Watch’s unable to check for update issues, here are eight solutions to fix it and experience the latest features/better security.

Are You Going to Lose Your Data As a Result of Resetting?

Before resetting your Apple Watch, you might wonder where the data of your Apple Watch might go. Will all those files will be gone? Or is creating a backup of those files required before performing a reset?

The good news is that there’s no risk of losing the data stored in your watch after a reset. Also, you don’t have to create a manual backup.

That is because an automatic backup of your Apple Watch will be created when you unpair it. So, the latest data will be retained safely in the paired iPhone.

What Sort of Data is Saved in the Backup?

  • App layouts for the home screen
  • App data
  • Dock settings
  • Configurations of the clock face
  • General configurations, including haptics and brightness
  • Settings for notifications
  • Health & fitness data
  • Albums and music playlists that are synchronized to your Apple Watch
  • Preferred time zone
  • Feedback settings for Siri

These Data Are Not Included

  • Message history
  • Your debit or credit card information saved on Apple Watch
  • Bluetooth devices that were paired previously
  • The passcode of the Apple Watch

So, How to Reset an Apple Watch and Pair It Again?

You’re here because of the ‘too many passcode attempts reset Apple Watch,’ right? So, there’s nothing left to do other than reset your Apple Watch.

As the first step, you are supposed to erase your watch. But the problem is that you cannot follow the usual route to reset your Apple Watch.

That means you cannot simply go to “General” and select the “Reset” option and then select “Erase All…“. You are not in a position to access the “Settings” option on your watch.

However, if you wish to erase your iPhone, there are two different ways to proceed.

Erasing Your Apple Watch Using an iPhone

  • First, you must make sure that the faulty Apple Watch is close enough to your iPhone. Of course, this is required to establish a strong, solid connection between the two devices.
  • On the iPhone, you should open the app called “Watch.” On its interface, you should tap the option called “My Watch.”
  • Now, you should go to “General” and select “Reset” from its options to proceed.
  • After that, you can choose the “Erase Apple Watch…….” option. You can then adhere to the instructions on the screen.
Erase Apple Watch Content and Settings

Erasing Your Apple Watch Using Your Apple Watch

  • First, you should place the faulty Apple Watch on the charger.
  • After that, you are supposed to press the watch’s side button and hold it. Make sure you don’t leave the button until the power off option is displayed.
  • Then, you should press the digital crown of the apple watch and hold it. That will lead to a reset screen. Just tap on the option called “Reset.”
  • Follow the instructions displayed on the screen to proceed.

You can use any of the above methods to erase your Apple Watch if you want to reset it. Regardless of the method, the next step is to pair it again.

Now, you are supposed to bring the Apple Watch and the phone closer to begin the pairing process. You can then start configuring your Apple Watch during this process. If not, you can even restore the watch from an available backup.

Erasing Your Apple Watch Using Your Apple Watch

And that is the solution if you experience the ‘too many passcode attempts, reset Apple Watch and pair again.’

How to Change the Apple Watch Passcode?

What if you want to change your Apple Watch’s passcode for some reason or another? Well, the good news is that there’s no rocket science in it.

All you need is to follow the steps below to change the current passcode. However, to do this, you are supposed to know the current passcode.

  • Press the digital crown of the Apple Watch (it is located on the face screen). That will guide you to the App Screen of the device.
  • After that, you should tap on the icon labeled “Settings.”
  • Then, you are supposed to tap on the option called “Passcode.”
Change the Apple Watch Passcode
  • Now, enter the existing passcode to proceed. Then, you should enter the new passcode.
  • You will be asked to enter the new passcode once again; do it to proceed.

That’s it. But you cannot perform the above steps if you see the “Apple Watch too many passcode attempts” message.

Important: You should know that the above steps don’t remove your Apple Watch’s activation lock. During the configuration process, you are supposed to enter the Apple ID with its password to advance. When you complete the process, you will be able to create a fresh passcode.

After creating the new passcode, the “Apple Watch too many passcode attempts……” message will be gone. All you need is to remember this password well; otherwise, you will have to follow the same process again.

Preventing Too Many Passcode Attempts in the Future

To prevent encountering the “Too Many Passcode Attempts” issue on your Apple Watch in the future, consider the following tips:

  1. Use a memorable passcode: Choose a passcode that is easy for you to remember but difficult for others to guess. Avoid using obvious combinations like 1234 or your birthdate.
  2. Enable Wrist Detection: By enabling Wrist Detection in your Apple Watch settings, you can ensure that the device automatically locks when you take it off your wrist. This provides an additional layer of security and reduces the chances of unauthorized access.
  3. Use a longer passcode: Apple Watch allows you to use a passcode with up to 10 characters. Using a longer passcode makes it more challenging for someone to guess or crack it.
  4. Enable Erase Data: If you’re concerned about the security of your personal data, you can enable the “Erase Data” option in your Apple Watch settings. This feature erases all data on your device after ten consecutive incorrect passcode attempts.

Common FAQs about Apple Watch Passcode Issues

1. Can I reset the passcode on my Apple Watch without an iPhone?

No, you need to have your iPhone paired with your Apple Watch to reset the passcode. The pairing process is essential for managing your Apple Watch’s settings and security features.

2. What should I do if I forget my Apple Watch passcode?

If you forget your Apple Watch passcode, you will need to reset it using your paired iPhone. Open the Apple Watch app on your iPhone, go to the Passcode section, and follow the instructions to set a new passcode.

3. Will my Apple Watch erase itself after multiple incorrect passcode attempts?

By default, your Apple Watch will disable itself for a specific period after multiple incorrect passcode attempts. However, it will not erase itself unless you have enabled the “Erase Data” option in your Apple Watch settings.

4. Can someone else access my personal data if they have my Apple Watch but not the passcode?

If someone else has physical access to your Apple Watch but doesn’t know the passcode, they won’t be able to access your personal data. The passcode acts as a barrier to protect your information and prevent unauthorized access.

5. Can I use Touch ID or Face ID to unlock my Apple Watch?

No, Apple Watch does not support Touch ID or Face ID for unlocking the device. You can only use the passcode to gain access to your Apple Watch.


Ensuring the security of your Apple Watch is vital in safeguarding your personal information. Understanding what happens when you encounter the “Too Many Passcode Attempts” message and knowing how to unlock your Apple Watch is crucial for resolving such situations. By following the recommended guidelines and taking preventive measures, you can enhance the security of your Apple Watch and minimize the risk of unauthorized access to your data.


Ten years of experience in information and computer technology. Passionate about electronic devices, smartphones, computers, and modern technology.