The NTFS.sys error occurs due to corrupted or missing files. What are the best solutions to solve this problem?
If you are looking for the answer, you can refer to this article. Here are some answers to fixing the NTFS.sys error.
NTFS.sys Missing or Corrupted Error
I came across the NTFS.sys error when I was installing Service Pack 2. My system froze, and I rebooted my system. After this, I read the error – Windows could not start because the following file is corrupt or missing: System32Drivers Ntfs.sys.
I attempted to repair this error by starting the Windows Setup with the help of the original Setup CD-ROM. When you see the first screen, tap on ‘R’ to start the repair process.
I followed all the steps in the tutorial and ran it all through, except, in the end, the ‘quit’ command did not work, and the CD-ROM did not eject as well. Hence, I used the ‘exit’ option to remove the CD-ROM after the reboot.
Then, my system goes back to the same starting windows. How can I fix this problem without formatting my hard drive and reinstalling Windows?
If your NTFS.sys file is corrupted or missing, a blue screen error will occur. This happens very usually. Hence, you need to know how to solve the NTFS.sys error. Additionally, missing the boot.ini file is also quite a common issue.
PS: let’s figure out how to fix issues like scanning and repairing drive stuck.
Part 1: How Do You Fix the NTFS.sys Error?
If the way mentioned above does not work, you will have better luck with a dedicated NTFS.sys error fixer. There are a lot of programs and tools that can help you do the same. Here, we would like to recommend Wondershare LiveBoot.
This program is very easy to understand and use and will fix your problem within minutes. LiveBoot also provides a USB drive, CD, and DVD to boot your computer.
- Step #1: Insert the LiveBoot USB drive, CD, or DVD, and start your computer.
- Step #2: Once your system runs, you need to head to the Boot Menu and tap on the Boot from LiveBoot.
- Step #3: Next, you need to tap on the ‘Windows Recovery’ button and the ‘Boot Files Recovery’ menu on the left.
- Step #4: If you have more than one Windows on your hard disk, you need to select the target one and start the scanning work. However, if you have just a single Windows, you can ignore it.
- Step #5: You can tap on Repair your Windows to start repairing.
Besides, let’s learn how to recover data from NTFS Hard Drives.
Part 2: How Do You Recover the Data Lost During the NTFS.sys Error?
At times, the NTFS.sys error can cause the loss of important files. It is also possible that some data on your computer will get removed during the repair process.
To deal with these circumstances, you will have to use a very powerful data recovery tool to get your operating system and computer back on track.
Also, if you are bothered because of nvlddmkm.sys error on your computer, this article explains how to fix this issue even if you are a novice.
Recoverit Data Recovery Software
Recoverit data recovery is a great choice when it comes to restoring lost/deleted files or recovering your hard drive’s (HDD and SSD) formatted partition.
It can also be used for many other devices like mobile phones (phones with older Android OS than ICS), music players, iPods, camcorders, digital cameras, memory cards, USB flash drives, and external hard disks. The software is very easy to understand and use.
Features of Recoverit Data Recovery
Here are some great features of the Recoverit data recovery software:
- You can safely, effectively, and completely recover deleted or lost emails, music, audio, photos, and files from any storage device.
- The tool supports data recovery from camcorders, digital cameras, flash drives, memory cards, hard drives, and your system’s Recycle Bin.
- The software can recover data after various problems like system crashes, virus attacks, hard drive corruption, formatting, or sudden deletion.
How Does Recoverit Data Recovery Software Work?
As said above, Recoverit is a very simple tool to use. All you need to do is follow the steps mentioned below:
- Step #1: Once you have installed Recoverit, you must launch the program and choose recovery mode. To start, you can choose the ‘Deleted Files Recovery’ mode.
- Step #2: After this, you need to choose the location where you have lost your data. Then, tap on the ‘Start’ icon to begin scanning.
- Step #3: The program will start a quick scan to find the lost data. Alternatively, you can also opt for the ‘All-Around recovery’ option for a deeper scan to look for files that cannot be found via the quick scan.
- Step #4: Once the scanning option starts, the program will start displaying the recovered files. While the recovery progresses, you can view the preview of the recovered files. All you need to do is choose the files you want to recover and tap on the ‘Recover’ option to start the process.
Tip: Do not save the files in the same location where you have lost or deleted the data.
By the way, let’s learn more about how to fix the Storahci.sys error with the blue screen with ease.
Part 3: What Are Other Methods of Fixing the NTFS.sys Error?
Here are some other methods of fixing the NTFS.sys error:
Method 1: Fixing the Disk Corruptions
You can make use of the in-built Windows Chkdsk utility to fix errors like bad sectors and file system errors. This will help you solve all your disk corruption via the command-line tool.
If you do not want to use the command lines, you can use the disk checking feature for the same effect.
- Step #1: Start your system in the ‘Safe Mode with Command Prompt.’
- Step #2: Once your computer starts, right-click on the drive with the problem and tap on ‘Properties.’
- Step #3: Head to the ‘Tools’ tab and then on ‘Check.’
Method 2: Updating the Device Driver
The NTFS.sys error can also occur due to a corrupted or outdated driver. With the help of the Event Viewer, you can figure out which driver is the faulty one.
Then, you need to head to the ‘Safe Mode with Networking’ to update the corresponding driver.
- Step #1: You need to right-click on ‘This PC,’ then on ‘Manage,’ and then on ‘Device Manager.’
- Step #2: Then, expand the ‘Display Adapters’ and ‘Update Driver’ by right-clicking on the graphics card driver
Method 3: Update your Windows system
By updating your Windows system, you can fix a lot of problems and bugs; additionally, it also updates the necessary drivers.
- Step #1: Start your system in the ‘Safe Mode.’
- Step #2: Tap on ‘Start’ and type in ‘Update.’
- Step #3: On the next window, you need to click on ‘Check for Updates.’
- Step #4: Once done, Windows will show you all the available new updates. Tap on ‘Install Now’ to update your Windows
Method 4: Check the RAM
An incorrect RAM setup or a faulty RAM installation can be another reason why the NTFS.sys error occurs. Check your hardware first and check whether the RAM sticks are connected properly or not.
You can find the problematic stick by trying out each one by one. If there is nothing wrong with the hardware, you need to check the frequencies and timings of the RAM.
You can get the recommended values by applying third-party tools or from the manufacturer.
According to Microsoft, there are also several other tips that will help you solve the NTFS.sys error:
- Ensure there is enough space in the drives; if not, you need to extend the system drive to make your system run normally.
- You can run the hardware diagnostics provided by the manufacturer.
- Disable any disk defragment tools, backup programs, and virus scanners