PS4 White Light Issue – Best 7 Solutions to Fix It Easily!

Affiliate Disclaimer: If you purchase through links on our site, we may earn an affiliate commission at no additional cost to you!
Photo of author

Update on

Are you noticing a PS4 white light issue and looking for a quick solution to overcome it? If so, you must be desperate to find a solution, don’t you?

Well, this article is composed to explain everything about this issue and the best solutions to address it.

Introduction to PS4 White Light Issue

PS4 White Light Issue

Although it’s connected to the blue light flashing, the PS4 white light flashing usually indicates a less severe issue. Particularly, it points to problems with the TV’s connection, its HDMI port, or the HDMI cable.

That your PS4 isn’t properly connecting to the TV is. Therefore, it’s possible that your TV won’t work at all. You could also see “No Signal” notifications or visuals that are unclear or glitchy. The possible problems you could be experiencing are as follows.

Besides, are you looking for a USB hub for PS4? If so, there’s no need to roam here and there. Read about the best PS4 USB Hubs available out there.

Possible Reasons for This Issue

1. The Issue Can Relate to Your Console’s HDMI Port

PS4 HDMI Port

Particularly speaking, the pins of the port are precariously supported by a thin plastic base, making them fairly vulnerable. The HDMI cable will not function in this situation. Damage to those copper pins inside of the HDMI port will prevent it from functioning.

That means the pins that are pushed out, detached, crooked, bent, etc. That is a common reason for the PS4 white light issue.

It’s also not uncommon to find that the port’s outside metalwork is twisted or wobbly. For this reason, the HDMI cable you have won’t fit into the respective port.

The only way to fix this type of problem is to get a new port. Though the Slim and Pro versions of PS4 have improved ports, they are still susceptible to the same problems.

Also, while playing games on PS4, you may encounter the ‘NAT type failed on PS4‘ error. If you are struggling with this issue, let’s fix it now.

2. An Issue Related to Your Console’s HDMI IC

PS4 HDMI IC

In order to process the signals of HDMI, the motherboard comes with the IC. Eventually, it will burn out and signal a problem by flashing white light on the PS4’s casing.

Unless you have access to a debugger, you’ll need to take your PS4 in for a professional diagnosis. This is true even if the respective port and cable appear to be in good working order.

3. There’s a Power Surge

Power Surge

Another possible culprit is an electrical surge. In particular, it does threaten the electronic components responsible for transmitting the AV signal. There can be power surges, for instance, because of potential electrical surges.

With the HDMI cable that connects your PS4 and TV, the power surge travels through the TV. Also, it may even reach the gaming console. The IC chip could get fried, the ports could get messed up, and resistors or diodes could be harmed. Also, there could even be a random power glitch.

4. Dust, Dirt, and Rust

Dust, Dirt, and Rust

In fact, the accumulation of dust or rust on your PS4 console’s port isn’t a game-breaker. You may be able to fix this by wiping it down with a soft microfiber cloth. You can then blow it dry with an air compressor.

On the other hand, dust can also build up within the PS4. It’s also possible that the HDMI signals are being obstructed because dust has settled inside its circuits.

Changing the CMOS battery on the motherboard is a procedure that requires technical knowledge and special equipment. Because of that, we usually advise against disassembling the PS4 console unless absolutely necessary. As a result, you might want to get the console professionally cleaned.

5. An Issue Related to the Motherboard of the Console

Motherboard of the PS4 Console

There could be a problem with the motherboard causing your issue. This is a systemic issue, and unfortunately, there isn’t any way for you to pinpoint it from where you’re.

A technician is the only one who can tell by comparing your PS4 console’s components to another board.

6. The Controller Device Has Bugs

PS4 Controller Device Has Bugs

The white light issue is occasionally brought on by faulty controller drivers. There is no need to upgrade the firmware on your PS4 controller. However, it often has issues that necessitate resetting the controller. You can’t use your controller with the console because of faulty drivers.

In exchange, it fools the PS4 into thinking the motherboard is broken. The truth, however, is that your console just forgot to update the peripherals automatically.

7. Your Console’s Firmware is Outdated

The console’s firmware could be outdated. It doesn’t happen often, but it can cause unexpected problems. Assume that the PS4 has trouble connecting to the internet or that you are using an unstable internet connection.

In that case, issues like PS4 white light can occur. This indicates that the automated console update did not take place.

By the way, are you tired of asking yourself, “why is my PS5 lagging?” Discover the reasons behind PS5 lag issues and learn how to troubleshoot the problem like a pro.

Solutions to Fix This Issue

The PlayStation 4’s white light flashing signals is an issue with your console’s HDMI cable or connection.

While most issues require expert help, there are several fixes you can attempt first. Put each one through its paces and see whether you can isolate the problem.

Assume that your PlayStation 4 is still malfunctioning after you have tried the solutions on these “checklists.” So, you should try these solutions. You will need to have it serviced.

1. Clean Your HDMI Port

Clean Your HDMI Port

One of the most practical solutions to address this situation is to check the HDMI port.

Perhaps, your HDMI port can accumulate substances like rust, dust, and dirt. In fact, even a small amount of dirt can make your HDMI port malfunction.

  • It’s possible to use an air blower so you can blow away dirt easily without a physical connection.
  • You can even use a small vacuum cleaner and such the dirt out.
  • Use a soft brush (for instance, a toothbrush) and both ends of the port.
  • Use something like a cue tip so you can clean every part of the port. Make sure that it is done gently without bending or damaging pins.
  • Never use water or any other liquid to clean it up.

2. Check if the Port is Physically Damaged

In addition, make sure the HDMI port is not severely damaged. Problems manifest themselves in the form of bent or damaged pins and metal coverings.

Taking the console in for service to have the port swapped out is necessary upon any visible damage.

3. Use a Different Cable

Use a Different Cable

The white blinking light on the PS4 is typically not connected to external factors such as the HDMI cable. Testing, however, is not only harmless but also quick.

Assume that the television displays the “No signal” warning. That means the connection is not successfully transmitting a message to the PS4 system. However, a flashing white light isn’t appropriate for this issue.

The PS4’s system may mistake a cable’s bending or lean on a pin for a hardware malfunction. Moving your cable until it “clicks” into place on the port might sometimes resolve the issue.

Wiggling the Cable Can Fix the Error

That being said, you can try jiggling your HDMI to fix this specific issue. Or, you can remove or reinsert it on the PS4. Further, you can use your TV to verify the link. You may also try jiggling it in your HDTV connector until you hear the click sound. 

Finally, you may try out different HDMI cables using your PS4 console. Also, you can test your cable using different devices, such as Roku. If that’s the case, you’ll need to invest in a genuine PlayStation 4 HDMI cable.

A standard HDMI cable from today should be compatible with your retro gaming system. To connect a PS4 Pro to a 4K television, though, you’ll need HDMI 2.0 cable. Also problematic is the possibility that you are using the incorrect cable.

4. Power Cycling the Console

Sony suggests rebooting the system as a next step.

If you recognize a power failure to be the problem, it will eliminate any number of seemingly random issues.

  • Turn off the faulty console
  • Unplug the device from the cables
  • Wait at least 5 minutes.
  • Get the cables reconnected
  • See how it works

5. Synchronize the Controller Automatically

As of this stage, you have made sure that your HDMI port is fine. So, now it is time to pay attention to controller-related issues.

First, you should ensure that the controller is synchronized automatically.

  • Switch off your console to proceed.
  • Press both Share and PS buttons simultaneously.
Synchronize the Controller Automatically
  • Wait for a couple of seconds so the PS4 will be turned on. Now, you should see if the issue is fixed.

6. Reset the Firmware

Mentioned below are the steps to reset firmware and fix the PS4 white light issue.

  • Switch off the console.
  • Get a hairpin and push the small button located at the rear of the controller. This button is located in a small hole. Make sure that you hold the button for seven seconds.
Reset the Firmware
  • Now, you should connect the controller and the console using your USB cable.
  • Turn your PS4 off.
  • Press the console’s PS button.
Press the console's PS button

Now, you should check if the White Light on the PS4 issue is gone.

7. Reset Your Console with Safe Mode

If nothing has worked so far, try to reset the console with Safe Mode.

  • Find a flash drive that has 6GB of free space.
  • Format it using exFAT or FAT32 mode.
Format PS4
  • Now, select the “Update” option in the PS4 folder located in the drive.
  • You can download the system software for PS4 using Sony’s official web page. Select the option called “Reinstall System Software.”
  • Now, you should save the option called “PS4UPDATE.PUP“. You can see it in the subfolder named “Update.”
Reset Your Console with Safe Mode

Then, you can reinstall the same file on the console’s safe mode.

  • Turn off the console.
  • Unplug the cable and leave it for about 5 minutes.
  • Now, you should insert the USB stick and reinstall that file.
  • After that, plug your power cable in rather than the HDMI.
  • Press the power button and hold it for about seven seconds. You will hear a second beep, and that’s an indication of entering the power mode.
  • Use your HDMI cable and connect the TV and the console. Continue with the steps to reset your console.
  • Now, connect the console’s controller using a USB cable. Press the PS button.
PS4 Safe Mode
  • Select “Initialize PS4” (that’s the 7th option).
Reset Your Console with Safe Mode
  • Select “Update from USB” and hit “OK.”

Restart the device and see if the issue is gone.

Prevention Tips for Avoiding PS4 White Light Issue

While the PS4 White Light Issue can occur unexpectedly, following these prevention tips may help minimize the chances of encountering the problem:

  1. Proper Ventilation: Ensure that your PS4 is placed in a well-ventilated area, as overheating can contribute to hardware malfunctions.
  2. Regular System Updates: Keep your PS4’s system software up to date by installing the latest updates released by Sony. These updates often include bug fixes and improvements that can prevent issues like the white light problem.
  3. Gentle Handling: Handle your PS4 with care and avoid any rough movements or impacts that could potentially damage the internal components.

Conclusion

The PS4 White Light Issue can be frustrating for gamers, but with the right troubleshooting steps, it is often possible to resolve the problem. By following the guidelines outlined in this article, you should be able to troubleshoot and fix the white light issue on your PS4. Remember to reach out to Sony Support if you require further assistance.

FAQs

Q1. Is the PS4 White Light Issue a common problem? Yes, the PS4 White Light Issue is a relatively common problem reported by some PS4 owners.

Q2. Can a faulty HDMI cable cause the PS4 White Light Issue? Yes, a loose or faulty HDMI cable can prevent the PS4 from displaying video and audio output.

Q3. Will initializing the PS4 delete all my data? Yes, initializing the PS4 will restore it to its factory settings and delete all data. Make sure to back up your important files before performing this step.

Q4. What should I do if the troubleshooting steps don’t resolve the white light issue? If the troubleshooting steps mentioned in this article don’t fix the white light issue, it is recommended to contact Sony Support for further assistance.

Q5. How often should I update the PS4’s system software? It is advisable to regularly update the PS4’s system software whenever new updates are released by Sony. This helps ensure that you have the latest bug fixes and improvements.

Jack
Jack

Ten years of experience in information and computer technology. Passionate about electronic devices, smartphones, computers, and modern technology.

More Articles

Find Charmander Pokemon Go
Game

How to Find Charmander in Pokemon Go Easily?

Do you wonder how to find Charmander in Pokemon Go without much hassle? Don’t worry because this explains the ...
Instagram Unknown Network Error
Instagram, Repair

[FIXED] Instagram Unknown Network Error

Instagram’s unknown network error can make you frustrated as it prevents you from accessing Instagram content. This is ...
this plugin is not supported chrome
Repair

[Fixed] This Plug-in is Not Supported Error in Google Chrome

Are you frustrated with the "plugin not supported" error in Google Chrome? Updating the browser and enabling specific plugins may help. Read on for more tips.