Are you facing the error ‘NAT type failed on PS4’ while playing PS4 games? When you play PS4 games, you may face issues while chatting with other games online in your party chat.
While testing your internet connection, you will encounter the ‘NAT type failed on PS4‘ error. No worries, as various solutions exist to fix this PS4 NAT Type issue.
Here, we will introduce four different methods to resolve this annoying issue. Try them out one by one until you get this issue resolved. There is no need to go through all of them.
However, before you begin, ensure your network is working properly, including all the cables, modem, and router. Examine the network connection on other devices to check whether it is working.
Part 1: What is NAT Type in PS4?
NAT refers to Network Address Translation. This represents the skill of translating a public Internet Protocol (IP) address to a private one and vice versa.
In the games of PS4, it signifies the difficulty or ease of connecting to another PS4 system, especially while you employ the communication features, such as your party chat.
In the PS4, there are three NAT types, which are:
- Type 1: This type is open, where the PS4 system is connected to the internet directly without any firewall or router. Users do not face any issues while connecting to another PS4 system.
- Type 2: This type is moderate, where the PS4 system is appropriately connected via a router. Usually, you would not face problems with this one also.
- Type 3: This type is strict, where the PS4 system is connected via a router without DMZ setup or open ports. Here, users may struggle with voice chat or connection problems.
Normally, you face the error ‘NAT type failed on PS4’ due to the network problems like firewall issues or improper network settings. Modifying the NAT type could be an effective solution for improving the PS4 network position. Users can change this NAT type from the router settings.
PS: click to find out how to spot a fake PS4 controller.
Part 2: Different Solutions to Fix the ‘NAT Type Failed on PS4’ Error
Now, let’s look at the different solutions you can follow for resolving the ‘NAT type failed on PS4’ error.
Besides, are you confused about why your PS4 controller won’t charge? And you are looking for ways to solve the issue? If yes, then you are at the right place.
Solution 1: Configure the Network Settings of PS4 Manually
In the PS4, the error ‘NAT type failed on PS4’ can result from improper network settings. So, you need to examine whether the IP address of your PS4 has changed.
Moreover, you can configure the network settings manually in the PS4 to make it correct.
Steps to check the IP address of your PS4:
If you have no clue about the IP address of your PS4, you can check this address in the following manner.
1: Visit the PS4 Settings and then choose ‘Network.’
2: Next, choose the ‘View Connection Status‘ tab.
3: You can now see the details regarding the network your PS4 is connected to, including its IP address.
Steps to configure the network settings of PS4 manually:
Follow the instructions below to manually configure the network settings to resolve the ‘NAT type failed on PS4’ error.
1: On your Windows laptop or PC connected to a similar network as the PS4, press the tabs ‘Windows‘ + ‘R‘ simultaneously on the keyboard.
2: Enter “cmd” in the Run dialog box and hit ‘Enter.’
3: Copy the command “ipconfig/all” and paste it into the Command Prompt. Then, hit ‘Enter.’
4: Next, note down your IP address, DNS server, subnet mask, and default gateway.
5: Visit the PS4 Settings and from there, go to ‘Network‘ and then click ‘Set up Internet Connection.’
6: Users need to choose ‘Use WiFi‘ if they are connected to a WiFi connection or choose ‘Use a LAN Cable‘ if they are connected to the Ethernet.
7: Choose ‘Custom‘ and then put in your network information that you noted down recently.
8: After that, choose ‘Do Not Use‘ for the Proxy Server.
9: Now, wait for a while to get it updated. Choose ‘Test Internet Connection‘ on seeing the message “Internet Settings updated.”
10: Next, you will be able to see the PS4 internet connection and the NAT type of your PS4. Lastly, check if the error ‘NAT type failed on PS4’ has been fixed or not.
Solution 2: Try Enabling UPnP for the Router
If configuring your network settings manually does not work, you have to try enabling UPnP for the router. Here, UPnP refers to Universal Plug and Play. This enables the devices to share the same network to find one another.
When you try enabling UPnP in the router, it could help enhance the connection while you play games and chat with other users. To do this, please follow below simple steps. Also, this solution applies to all routers.
Besides, here is everything about Kodi for PS4 for your reference.
Steps to fix the ‘NAT type failed on PS4’ error by enabling UPnP:
1: On your router, you must check your username, password, and IP address. This information is available on the router’s stick, or you can looks for it in the user manual.
2: Now, open any browser on your mobile device or PC. Then, enter your IP address in the browser and hit Enter.
3: After that, enter the username and password to log in. Next, tap on the ‘login‘ option.
4: Now, select ‘Advanced‘ and then ‘Forwarding‘ to see your UPnP. Depending on your router, look for this UPnP section under other tabs.
5: From there, you have to turn on UPnP.
6: Tap on ‘Save‘ or ‘Apply‘ to save the settings.
7: Next, reboot the router and then wait for the connection.
8: Visit the PS4 Settings and go to ‘Network.’ From there, choose ‘Test Internet Connection.’
Now, see if the error ‘NAT type failed on PS4’ has been resolved by turning on the NAT Type.
Solution 3: TransformYour PS4 Into the DMZ Server
Users can resolve the ‘NAT type failed on PS4’ issue by transforming their PS4 into the DMZ server. Here, DMZ refers to Demilitarized Zone.
This zone is a logical or physical subnetwork comprising an organization’s external-facing services to an unreliable network.
By doing so, you can amend the network configurations of your router. This helps to improve network performance if you check the settings properly. Some users may worry about causing security issues by this method.
However, it is perfectly fine as you are employing this network at your house rather than in a public place.
1: Firstly, check your username, password, and IP address on the WiFi router.
2: Go to any browser on your smartphone or PC and then enter your IP address there. Then, hit Enter.
3: Enter the username & password for logging in.
4: Navigate to the ‘Advanced‘ tab and then ‘Forwarding.’ Here, you will find DMZ. This section will be in different tabs depending on your router.
5: Tap on ‘Enable‘ to enable DMZ.
6: Change your IP address to match it with the PS4 IP address.
7: If your router features an option called NAT Filtering, you can click on ‘Open NAT Filtering.’ If your router does not have this option, skip this step.
8: Tap on ‘Save‘ or ‘Apply‘ to save the settings.
9: Reboot the router and let it connect to the network.
10: Visit your PS4 Settings and then click on ‘Network.’ From there, select ‘Test Internet Connection.’ Now, examine if the NAT Type is enabled and if it fixed your device’s error ‘NAT type failed on PS4’.
Now, this may help in getting all the traffic to the PS4. Also, it helps reduce network limitations when you use the PS4.
Solution 4: By Forwarding Port for the PS4 Network
Forwarding ports is also known as ports mapping. This redirects the request for communication from one port number and address to another.
Meanwhile, packets traverse a network gateway like a router. So, users can enhance network performance by port mapping.
Before you begin, ensure that your ISP does not feature the Carrier-Grade-NAT. If it does, then you might fail to configure it. Also, you need to select NAT Type 3.
Steps to fix the ‘NAT type failed on PS4’ error by forwarding the port:
1: Note your username, password, and IP address from the router.
2: Open any browser on your phone or PC and enter your IP address. Hit Enter.
3: Enter the username and password for logging in.
4: Navigate to the section ‘Forward Ports.’ This section can be named differently depending on your router, such as ‘Ports Forwarding,’ ‘Applications,’ or ‘Virtual Server.’
5: Now, add your custom forwarding ports. Users can try the ports listed here, which Sony suggests. These include:
80 (TCP), 3478 (TCP and UDP), 443 (TCP), 3480 (TCP), and 3479 (TCP and UDP)
Note: You have to give a name and assign the IP address of your PS4 to every port.
6: Tap on ‘Save‘ or ‘Apply‘ to save your changes.
7: Visit PS4 Settings and go to ‘Network.’ Next, select ‘Test Internet Connection‘ to check your NAT Type. Lastly, see if the error ‘NAT type failed on PS4’ has been fixed successfully or not.
Testing the NAT Type After Applying Solutions
After implementing any of the solutions mentioned above, it’s essential to test the NAT Type on your PS4 to ensure the error is resolved. Follow the steps provided in Section 3 to check the current NAT Type. If the NAT Type is now Open or Moderate, you have successfully resolved the ‘NAT Type Failed on PS4’ error.
Q1: Can I resolve the ‘NAT Type Failed’ error without accessing my router settings? A1: Unfortunately, most of the troubleshooting steps require accessing your router settings. It is necessary to configure the necessary ports and make changes to your network settings.
Q2: What is the best NAT type for online gaming? A2: NAT Type 2 is generally recommended for online gaming as it allows for a stable connection while still providing some level of security.
Q3: Will changing my NAT type improve my gaming experience? A3: Yes, changing your NAT type from failed to either Type 2 or Type 1 can improve your gaming experience by enabling better connectivity and reducing connection issues.
Q4: Are there any risks involved in enabling UPnP or setting up port forwarding? A4: Enabling UPnP or setting up port forwarding can expose your device to potential security risks. It is important to keep your router’s firmware up to date and follow best practices for online security.
Q5: How often should I update my router’s firmware? A5: It is recommended to check for firmware updates regularly, as manufacturers often release updates to address security vulnerabilities and improve compatibility.
The ‘NAT Type Failed on PS4’ error can be frustrating, but with the right troubleshooting steps, you can get back to enjoying online gaming with your friends. Remember to restart your router, enable UPnP or configure port forwarding, check firewall settings, and update your router’s firmware.
By following these steps and testing your NAT type, you can resolve the error and have a smooth gaming experience on your PS4.