The TV screen is used for displaying the images and videos which are being played on the device. In some cases, if the TV has sound but no picture for no clear reason, then you cannot enjoy any content available on TV.
There is sound, but no picture on the TV screen is a widespread problem in all brands of Television. This problem can be caused due to various reasons.
In this article, we have discussed the potential causes of a black screen with sound. And later, we also discussed the troubleshooting tips to solve the issue quickly and without spending much money. So, read on.
Causes for the TV Screen being Black with Sound
If your TV screen is black with sound, many possible reasons may have been causing the issue. And some of such reasons are as mentioned below:
1. Issue with Backlight
If the backlight isn’t working, you will see that the TV has sound but no picture. A multimeter can test whether the backlight is working. It does that by measuring the resistance between two terminals on a power supply board.
If there’s no resistance and the multimeter displays an open circuit, there is no voltage running through your TV. And therefore, no power is coming to your LCD panel.
Besides, are you seeing a black screen with no picture on your Vizio TV? This article will introduce some possible causes & fixes for the Vizio TV black screen.
2. Power Supply to the TV
Check the power supply cable and adapter if the TV is not plugged in. Do not try to use a different power cord or outlet, as this may cause damage to your TV.
If no voltage comes through the cord, it may be defective. So you should only buy a new one instead of fixing it yourself if at all possible.
If there is power going through the cord, but still there is only sound but no picture on the TV, check if anything in your home has been turned off. Then make sure both devices are turned on.
3. Issues with TV Panel
The panel is the part of the TV that displays the picture. It’s made up of millions of pixels, which can be damaged or broken. The most common cause is when something falls on top of it, like a piece of furniture or an appliance. If this happens, you will hear the sound but no picture on the TV.
If your panel has been damaged by heat or moisture and won’t turn back on, you will have to replace it with a new one.
4. Bad or Faulty Wiring
If the wires connecting to your Television’s back are loose or damaged, they may need to be reconnected. If they are not connected at all, check whether there was a problem with the installation. Or check if they were never hooked up properly in the first place.
You can also check whether the wiring is connected to the correct place on your TV.
5. Issues with Capacitor
A capacitor is a small electrical component that is used to store energy. It’s found in many electronic devices, including TVs, computers, and chargers.
If the capacitor is faulty, it may cause the TV screen to be black with sound. A defective power supply can also cause this issue.
Turn on your TV, and check the circuits before sending any signal to the display panel. No signal will be sent out if there’s an issue with these circuits or if they don’t work due to a faulty capacitor or another component failure.
And thus, nothing will appear on your screen—even if there is sound from the speakers attached to your TV set!
6. The Sleep Timer is Activated
If you’ve turned on the sleep timer, it will automatically turn off after a specific time. To turn off the sleep timer:
- Press MENU and then press down to highlight Settings.
- Press OK to enter settings.
- Scroll down to the Sleep Timer and press OK.
The Sleep Timer icon appears in the lower-right corner of your screen when active. When this icon is displayed, your TV goes into standby mode after a set amount of time passes without receiving any input signals.
Also, let’s discover what to do with a broken TV, from assessing repairability to recycling or repurposing it. Learn how to handle your broken TV responsibly.
Fixes for TV Has Sound But No Picture
Now that you are aware of such reasons responsible for causing the problem of the TV having sound but no picture, it is time to learn about some fixes for them. So, continue reading.
1. Disable Power Saver Mode
One possible fix for the TV screen being black with sound is to disable power saver mode. Power saver mode is a feature of some TVs that turns off the screen if there is no activity on the screen. This can cause the screen to go black with sound.
2. Check the HDMI Cable and Change It if Necessary
When your TV has sound but no picture, it can be because of a faulty HDMI cable. You can try to fix it by replacing the HDMI cable or using a different one from your collection. You can try using an additional TV and cable box port if neither works.
Generally, ensure that both ends are firmly seated in their respective ports. If they’re loose or bent out of shape, try gently twisting them back into place as best as possible before reinserting them into their ports.
3. Power Cycle the TV
The next thing you can do to troubleshoot the sound issue of sound but no picture on the TV is to power cycle the TV.
Please turn off the TV, unplug it for at least 10 seconds, and then turn it back on. Then, unplug your cable box from the power outlet, wait 10 seconds, and plug it back in again.
4. Factory Reset the TV
- Please turn off your TV & unplug it from the wall.
- Wait 10 seconds. Then plug it back in and turn on the TV by pressing the power button on the remote or at the front of your television set.
- If you still have sound but no picture on the TV, press and hold down any button on your remote. Do it until you see “Repairing” appear on-screen. This indicates that factory settings are being restored to help resolve the issues.
- Press OK when prompted during this process to continue restoring factory settings. It’s safe to do so without harming anything! Wait for “Restoring” to indicate that everything went well before ending up back where everything started.
5. Replace the TV Power Board
For this repair, you’ll need a power board from your local electronics store. Make sure you have the suitable part number, tools, and instructions to replace it.
You’ll also need to unplug the TV before removing any screws. Once you’ve pulled them all, pop off the back of your TV and unplug any cables connected to it.
Then remove the power board and replace it with a fresh one of equal quality. When done, plug in all of your cables again. And turn on your set and check if it resolves the issue of the TV screen being black with sound.
6. Look Out for Loose Cables
Next, you should check if the cable is loose. If it is, then the HDMI ports might not be connected to your TV. Also, check for any damage on the cable and replace it if found damaged to fix the TV has sound but no picture issues.
Use another HDMI port at the back of your TV. Or try connecting it to another device, like a laptop or tablet, to see if it works there. And find out which port has some issues before doing anything else.
Preventing the Problem
Regular Maintenance
Regularly dust off your TV and check cables for any signs of wear and tear. Consider using a surge protector to protect your TV from power surges.
Adequate Ventilation
Ensure your TV has enough room for ventilation to prevent overheating, which can lead to several problems, including a black screen.
Frequently Asked Questions (FAQs)
- Why does my TV screen go black intermittently?
Intermittent black screen issues could be due to a faulty cable or an overheating problem. - Can a black screen be caused by a software update?
Yes, sometimes an update might introduce a new bug that causes this problem. - What does a black screen with sound mean?
It means that the audio part of your TV is working fine but something is preventing the video signal from displaying. - Can I fix a black screen issue by myself?
Yes, most of the time, a black screen issue can be resolved at home using the troubleshooting steps provided above. - When should I call a professional to fix my TV?
If you’ve tried all the troubleshooting steps and the problem persists, it may be time to call in a professional.
Conclusion
To conclude, we hope that these troubleshooting tips will help you solve the TV screen that is black with sound issues. And after the successful implementation of the tips, you will be able to get your TV working again.
Note that if none of the troubleshooting tips works for you, then it’s time to call an expert or replace the TV.
