Smarttvs

Roku Blinking White Light Issue – 5 Easy Solutions!

December 5, 2023

Affiliate Disclaimer: SmartTvs is supported by its audience. If you purchase through links on our site, we may earn an affiliate commission at no additional cost to you!

Without a doubt, Roku flashing white light issue can be an annoyance for any user. Making it even more bothersome, Roku’s customer support is not that impressive. So, you are not the only one looking for a solution if your Roku is blinking white light.

Read on to find out why your Roku streaming player or remote keeps blinking and how to stop it. When your Roku TV’s light is flashing in white, you may see that it cannot be switched on.

That said, we’ve included some troubleshooting steps that you can use. The good news is that you can use these methods even if you are unable to see your screen.

Why is Roku Flashing White Light?

You can easily see that there are indicator lights installed in your Roku remote (Roku remote not working) and the streaming device.

So, let’s go ahead and find out the reasons for this issue.

Roku Express, Ultra, or Stick

Roku blinking white light can occur on Express, Ultra, or Stick. Flashing white light on any of these devices may include one of the methods below.

  • There’s something wrong with the internet connection.
  • There’s a software-related issue.
  • Your device’s firmware is outdated.
  • The HDMI port or the TV has an issue.
  • The resolution of Roku is not compatible with the TV.
  • Your Roku device is malfunctioning.
  • The cable is either damaged or loose (applicable to Ultra or Express versions).

Underneath the app keys on the front of the Roku remote is an indicator light. And there’s another that may be found inside the battery door, next to the button labeled for pairing.

If the Roku remote’s front-facing light begins flashing in white color, the batteries need replacing. Simply putting in a new pair of batteries ought to restore normal operation to the light.

In order to link the remote, you must first press the button on your device’s backside. If it’s blinking white, that means your Roku can’t find another Roku to pair with.

Besides, Roku no signal is one such issue, and no one likes to see that on . So let’s learn the top solutions to fix Roku no signal error with ease.

Solutions to Fix This Issue

1: Restart the Roku Device

Minor software issues and transient network issues are generally remedied by a simple restart. And besides, Roku devices are just computers disguised in pretty packaging.

A Roku may be easily reset. To get started, just do what I say. You’ll need a functional Roku screen, of course. If that’s not the case, continue on to the next answer.

  • First, press your Roku remote’s home button.
  • Go to the “Settings” option from the menu that appears.
  • Now, you should select “System.”
  • Go to “Power.” However, if you don’t see this option on the menu, you can simply skip this method.
  • After that, you should press the option called “System Restart.”
Restart Roku

Now, your Roku device will take several minutes to reboot. Once the rebooting is completed, you will be able to see if the issue is resolved or not. If the issue persists, move to the next solution.

Also, here, we will tell you how to restart Roku TV in some easy and effortless ways to fix any technical issues on the device and keep it running smoothly.

2: See if the Cables and Connections Are Fixed Properly

After that, we will make sure the Roku is properly linked to your television. It’s possible that the issue is with your HDMI port, the cable, or simply a faulty connection.

First, remove the Roku from the TV. Inspect the cable for physical damage if you own a Roku Express or Ultra. Assume that you have access to a different HDMI cable. If so, you could try switching it out in case the original cable has been damaged on the inside.

A short HDMI extender cable is included with the Roku streaming stick. Try establishing the connection without it if you are using it. If the cable is at fault, it can be easily replaced at a later time.

Testing the Port

Plug the Roku device in question into a separate HDMI port to check its functionality. Put the TV into the correct input. The primary HDMI port on the Roku can be tested by connecting another HDMI device to it.

See if the Cables and Connections Are Fixed Properly

Replacing a damaged HDMI cable is not expensive or time-consuming. However, what if the respective port is malfunctioning? If so, you will need to get in touch with your TV maker to find a solution.

Remember that the HDMI cable is included with every modern Roku. However, composite cables could be the only option for Roku Express+ owners. 2018’s iteration of that Roku was the final to function without an HDMI cable. You can use the same instructions with a composite connection instead of an HDMI if that describes your device.

3: Restart the Router

Your Roku streaming player is very unlikely to be the source of Wi-Fi issues. Instead, they stem from an issue in the connection between your router and the Roku device. It’s easier to simply restart the router than to try to diagnose and fix such problems.

Before you continue, make sure the Wi-Fi network of your home isn’t being used by anybody else. Taking this action may disrupt everyone’s internet access for roughly 5 minutes. This might not go down well with your loved ones.

Mentioned below is how to power cycle your router when you’re ready to do so.

  • First, you should unplug the router’s power cable.
  • Once you have done that, you are supposed to leave it for about 30 seconds.
  • Plug those power cables in once again.
  • Wait for a couple of minutes so the router and modem will boot up.
Restart The Router

Now, you should check if Roku is blinking white light. In fact, if the issue is related to the network connection or the internet, it should be gone now. If the issue is still persisting, you should try the next solution.

4: Change the Solution of Your Roku

Some Roku resolutions are not available on older TVs but are supported by the device. Assume that you have a Roku that has always been connected to your TV and has always functioned dependably. In that case, the resolution is probably not the issue.

The resolution could also not be adjusted to a setting that your Television set can support. If you have acquired your Roku device recently, this theory is applicable. Also, such an approach becomes helpful if you purchase it used. Moving the Roku to a new TV can also cause this issue.

This issue can be remedied by obtaining a second television. Performing a factory reset can be the only alternative way to modify these settings. Therefore, if you do not have any access to one, move on to the next solution.

  • First, connect the Roku device to another TV (a 4K-compatible TV would be ideal).
  • Press your Roku remote’s home button.
  • Go to “Settings.”
  • Select the “Display Type.”
  • Now, you should select a display setting that works with the original TV. If not, you can even set it to “Auto” mode.
Change the Solution of Your Roku
  • Then, connect the Roku device to your original TV.

Perhaps even after connecting your Roku device to another TV, it would not play. In such a scenario, there’re still a couple of potential solutions we may test.

If Roku is displayed properly on the alternative TV, the revised settings should also apply to the first set. If neither of those things is the case, the problem may lie with your TV and not the Roku.

5: Perform a Factory Reset

Do your best to exhaust the aforementioned alternatives before resorting to this specific solution. All of your personalized settings for each app will be lost if you perform a factory reset.

Do you want to continue using your Roku after a factory reset? If so, you will need to have access to your Roku login credentials. You also should have the credentials for each of your streaming platforms.

You can return a Roku to its original factory settings in one of two main ways. If your Roku screen is functional, the first option is the most convenient method.

The second option works even if the Roku interface won’t appear on the TV. That is because it doesn’t require the use of the display.

Steps to Reset Your Roku

  • First, you should press your Roku remote’s home button.
  • Select the option called “Settings.”
  • Select “System” and go to “Advanced System Settings.”
  • Go to “Factory reset.”
Perform a Factory Reset on Roku
  • Follow the confirmation prompts displayed on the screen.

How to Reset Your Roku Manually?

  • Find your Roku device’s reset button.
  • Switch your Roku on.
  • Press “Reset” for about 10 seconds, so the LED should flash.
How to Reset Your Roku Manually

Also read: Why does ny Roku keeps restarting? – 4 reasons & 4 fixes!

FAQs

Q: Why is the white light blinking on my Roku device?

A: The blinking white light indicates that the device is in the startup phase and is unable to complete the boot process.

Q: How do I fix the blinking white light issue on my Roku?

A: You can try restarting the device, checking the power supply, verifying the HDMI connection, or performing a factory reset.

Q: Will a factory reset erase all my data on the Roku device?

A: Yes, a factory reset will erase all your settings and data. You will need to set up the device again from scratch.

Q: What should I do if the basic troubleshooting steps don’t work?

A: If the basic troubleshooting steps fail, it is advisable to contact Roku customer support for advanced assistance.

Q: Can I prevent the blinking white light issue from occurring?

A: While some causes are beyond your control, ensuring a stable power supply and keeping the device’s software updated can help prevent certain issues, including the blinking white light problem.

Conclusion

So, those solutions should fix your Roku blinking white light issue. You don’t have to try all of those solutions. Instead, try one solution so you can find out what the exact issue is.

If none of the above works, you can simply contact Roku support. However, it is a very time-consuming process, as we mentioned before. Roku does not provide the best customer service, and everybody knows that. Please let us know if you know of other solutions to address this specific error.