The brand Hisense is a Chinese electronics company. The company produces television sets, refrigerators, laptops, mobile phones, and many more. The company has been around for many years. And it has built an impressive reputation for quality electronics.
However, some common issues can arise with this brand of TV. One such issue is Hisense TV not turning on. Or it takes a long time to boot up and begin working properly again after restarting it from standby.
There are several reasons why this could happen. And there are several ways by which you can fix them yourself without having to call out a technician or take your TV back into the retail outlet just yet!
Reasons Why Your Hisense Roku TV Not Turning On
Several factors can affect your Hisense Roku TV not working correctly. The first reason is a faulty power supply. If the power cord or the AC adapter to your Hisense Roku TV is damaged or frayed, it may cause your Hisense Roku TV not to turn on.
Another reason why this issue occurs is due to issues with hardware and software. If you have recently updated the firmware of your Hisense Roku TV, then it may have caused this problem for you.
A third reason why this problem occurs is because of a faulty remote control unit (RCU). The RCU might be defective or broken when its batteries are low or run out entirely. If there’s no other source available yet again, then neither can turn on without replacement parts being replaced by another set!
Besides, here, we will tell you how to restart Roku TV in some easy and effortless ways to fix any technical issues on the device and keep it running smoothly.
Ways to Fix the Issue of Hisense Roku TV Not Turning On
The following are some of the most effective ways by which you can fix your Hisense Roku TV not turning on the issue:
1. Reset the TV
If Your Hisense TV won’t Turn On, Try the Following Steps:
- Unplug the power cord from both ends of the TV.

- Wait for two minutes to let any residual electricity dissipate before plugging it back in again.
- Turn on your television after you have plugged it back in and wait to see if it powers up correctly on its own.
- If that doesn’t work, then try rebooting your television again. You can do that by pressing down and holding either the “Power” or “OK” buttons on your remote control. Do this until you see a menu appear on the screen with an option to reset TV settings.
- Select that option and follow the instructions given on the Roku account page.
Also, if you wonder, ‘can you use Roku and Firestick on the same TV,’ here, you will figure out how to do it quickly and the difference between them.
2. Plug the TV into a Different Wall Outlet

For the next fix of Hisense TV not turning on, you need to plug the TV into a different wall outlet. If you use an extension cord or power strip, try plugging the TV directly into the wall socket rather than using an extension cord or power strip.
You may also need to use a different power bar/surge protector. Do you have multiple devices plugged into your surge protector?
If so, try unplugging them and plugging them back in one at a time until you find which device is causing this error message on your Hisense Roku TV.
In addition, are you experiencing the problem of the Sony TV won’t turn on? If so, here you will be introduced to some troubleshooting tips for the same.
3. Check and Change the Power Cord and Power Adapter
Power cords can become damaged over time through use or improper storage. This can result in insufficient current flow and lead to problems like these. Take your Roku player’s power cord out of its port and look for any signs of damage on either end. If any exist, replace it with another compatible cable of similar length.
If you don’t have access to another compatible cable, try checking if there are any other ways you can get electricity from somewhere else.
Thus, if your Hisense TV won’t turn on, chances are the problem can be remedied by checking and changing the power cord and power adapter. To do so:
- Unplug the TV from the wall outlet.
- Check if there is any damage to the power cord or adapters themselves. Such as bent pins or cracks in the plastic casing that may result from mishandling during shipping and transportation. If there is any damage, replace these parts with new ones.
- Make sure that both ends of your replacement power cord are securely plugged into both ends of an active working outlet at home or work.
- Then plug your Hisense Roku TV device into this newly connected socket at home or work again. As well as wait for five minutes more before turning it back on again without incident!
By the way, are you experiencing the issue of Hisense TV blinking red light? Don’t worry; read this article to find the reasons and easy solutions to fix it easily.
4. Troubleshoot the Remote

The next thing to do when your Hisense TV doesn’t turn on is to check the remote. The issue could be as simple as a dead battery or as complex as a damaged remote.
If you suspect your batteries are dead, replace them with new ones and try again. If this doesn’t work, proceed with the following:
- Check if the remote is set to the correct input
- Check for interference from other devices near it (such as phones or tablets)
- Verify that there is no damage to either your TV or the batteries in your remote
And using a universal remote for Hisense TV might be a smart move. And here are the Hisense TV remote codes for you to pair remotes with your Hisense TV.
5. Unplug All Unused Devices

If your TV is plugged into a power strip, then unplug it and plug just the TV into another wall outlet. Still, if the Hisense TV won’t turn on, try a different power cord or use a different power adapter to see if that works.
You can also swap out the power cords for something known to work and see if it turns on with either.
Make sure the outlet is working. You can do that by plugging in another device to ensure electricity is coming from that outlet. You need to do this before you continue troubleshooting any other issues with your Hisense Roku TV not turning on.
6. Check the Power Source
The next thing you’ll want to do to fix Hisense TV not turning on is making sure the TV outlet is working. To do this:
- Plug a different device into that outlet and see if it works.
- If it does work, check to ensure your Roku player isn’t connected to an extension cord or surge protector. This is important to check as these can cause problems with power.
- If this also doesn’t work, try connecting your Roku player directly to the wall socket.
7. Check the Backlight and Power Supply Board

Before you begin further troubleshooting for Hisense TV not turning on, make sure you check the backlight and power supply board. This board powers your TV and allows it to display an image.
So if it’s damaged or burnt out, it can cause your screen to appear blank, even if other components are working fine.
- Check for any burnt or damaged components. If any part of the backlight or power supply board looks burned, replace it with a new part.
- Ensure that there aren’t any loose connections between these boards and other parts of your device.
8. Troubleshoot Hardware Issues
- Check the power supply. Ensure that the TV’s power cord is plugged into a working outlet and that it’s getting electricity. If you’re using an extension cord, ensure it’s in good shape and hasn’t been damaged by water or other debris.
- Check your backlight and power supply board. If you’re getting no picture on your screen, chances are something’s wrong with one of these components. But since they’re hard to access, it may be tough to figure out what exactly went wrong.
You can bring in a repair person to help diagnose this problem if necessary. Otherwise, try some of these ideas:
- Remove any dust buildup around where all these components connect inside your TV so they can do their job more efficiently (but not too much—you don’t want anything falling out!).
- Try unplugging all cables inside your television. Then reinsert them until you find what makes things work again! This may take several tries before finding success!
9. Hard Reset Your TV
To hard reset your TV and fix the issue of Hisense TV not turning on, do this:
- Turn off the Roku TV and unplug the power cord from both ends.
- Wait 10 seconds, plug the power cord back into both ends of the Roku TV and turn it on again.
- If you’re still experiencing problems, try updating your firmware. You need to do that by pressing “OK” on your remote control when prompted during startup (if you have a newer model).
10. Remove All Network Devices
The next step to troubleshooting Hisense Roku TV not turning on is to remove all network devices. Network devices include memory cards, USB devices, and Bluetooth devices.
If you don’t understand this, it’s okay! To remove a network device like a USB or memory card from your Hisense Roku TV:
- On the front of your Hisense Roku TV, look for the SD card slot. It will be marked by an icon with two arrows pointing in opposite directions. One is pointing down, and one is pointing up.
- Insert the SD card into its proper position. So that when you turn on your Hisense Roku TV again, it will appear in menus where other media are displayed (like on Hulu).
11. Reach Out to Hisense Customer Support
Have you tried all the troubleshooting steps and are still facing the issue of Hisense TV not turning on?
If so, the next logical step is to call or chat with Hisense’s tech support team. You’ll be able to explain your issue in detail, and then they’ll try to figure out a solution.
- Visit the Hisense website.
Some helpful guides on their website can help resolve Roku TV issues, so it’s worth checking out.
If you have a problem that doesn’t seem to belong under one of these guides, don’t hesitate to contact them directly. You can reach out to them via email or social media channels like Facebook or Twitter!
Conclusion
The best way to fix your Hisense Roku TV not turning on is by checking that all the power cords are plugged in and connected to the correct ports. If they are, try resetting your TV.
As mentioned earlier, you can do that by holding the power button for at least five seconds until it turns off completely. Then turn it back on again and see if that works.
If all else fails, you may have to call an electrician or service technician who can help diagnose and fix any issues with your TV.