You will start to wonder how to charge an Apple TV remote if you are new to it. The requirement to charge the Apple TV remote arises when you see the low-battery notification.
You will see those notifications when the battery level goes down to 20%. So, keep reading if you are a novice looking for the proper way to charge an Apple TV remote.
OKAY! So, How Do You Charge Apple TV Remote?
As mentioned, you can see those notifications on the Apple TV remote. Those notifications start to appear when your Siri Remote’s battery level drops to 20%. To make it charge, you are supposed to use a Thunderbolt cable.
You will receive this cable and the Apple TV when you buy it. One end of this cable should be connected to the remote. A dedicated port for the Thunderbolt cable is located at the bottom side of the remote.
The other end of the cable should be connected to a power outlet to acquire power. In this case, it should be either a USB port or a dedicated wall adapter.
Regardless of the generation of the device, the charging port is located in the same place. That means both second and first-generation remote devices come with the charging port in the same place.
How to Check if the Remote Controller is Charging?
What you should know is that your Siri Remote does not come with a physical indicator to notify charging.
But the good news is that it displays a notification on the TV screen. It says that the remote has a power connection but doesn’t display the existing battery level.
It is possible if you want to check the existing battery level and the status. In that case, you should look for the menus on the Apple TV.
Please follow the below guide to check the battery levels of the TV remote.
- First, you should go to the app “System” on the home screen of the Apple TV.
- Then, you should choose the option called “Remotes and Devices.”
- Under that option, you can find the option called “Remote.” Click on it to proceed.
- If the Siri Remote has been put into charging mode successfully, you can notice it. In this case, you can see a lightning bolt on the right-hand side of the remote-like icon. Or, a different type of bar found in the battery-like icon will show the level of charging. That will clarify whether or not your device is charging.
When Should You Charge Apple TV Remote?
If you wonder how often to charge Apple TV remote, this paragraph is just for you. There is no requirement to charge your Apple TV remote regularly.
If you are a standard-type Apple TV user, you will not have to charge its remote often.
For instance, a single full charge will last at least a couple of months. Your Apple TV may take a couple of months to display the 20% notification.
Even if you get the notification, you don’t have to worry because the remote will get charged quickly. It will reach a full charged level within two hours or even less.
Besides, if your Vizio SmartCast not working and you wish to fix it, you can follow the guide here with every practical solution to address this issue easily.
How to Charge Apple TV Remote Battery?
You should know that Apple did not offer you the option of replacing batteries on their remote versions.
That means the first-generation and second-generation Apple TV remotes did not have replacement batteries. So, you had to replace the whole remote-control unit when it could not hold the charge anymore.
But when it comes to older versions of the Apple TV Remote, they had the option of replacement batteries. That means the devices are compatible with second-generation and third-generation Apple TV units.
They were manufactured with replaceable batteries (CR-2032), and they had a small button-cell design.
In this case, you will have to swap the old batteries once they have died. Nevertheless, regardless of the model, you cannot expect to recharge the remote as an entire unit.
By the way, are you interested in learning how to connect Apple TV to WiFi without a remote? Here is the step-by-step guide to setting up Apple TV without a remote.
Frequently Asked Questions
Let’s look at some of the most commonly asked questions about Apple TV.
What is the process of pairing your Apple Remote with the Apple TV?
Before everything else, you should switch on your Apple TV. After that, you should keep the remote very close to the device.
That means it should be within a couple of inches. Also, the remote should be placed on the front side of the TV screen.
If the remote is a 2nd Generation one, you should press the back button and volume + buttons. You should hold them for about two seconds.
When it comes to 1st generation devices, it is the menu button and volume up. When you hold those buttons, you can see a message that confirms a successful pair.
How to reset your Apple TV Remote?
Are you using a Siri or Apple TV remote? No matter what it is, use the original cable to charge it using the wall charger. That should be done in about 30 minutes.
Also, if it is an Apple Remote, just remove and reinstall the battery to reset it. In addition to that, you should unplug your Apple TV from your wall outlet. Then, wait for about six seconds and plug it back in.
How to reset the Apple TV if you don’t have the remote controller device?
Your Apple TV will get into sleep mode if you keep it inactive for some time. However, if you want to reset it earlier, unplug the power code from the wall. Then, plug it back in after at least six seconds.
From where to purchase a new remote?
You can either buy it from the Apple Store. If not, you can buy it from a third-party vendor like Amazon.
So, that’s how to charge the Apple TV remote. If you have further questions, please let us know.